CQ60 battery
 
HomePortalCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 As soon as the Backlight Of The LCD Television screen Has Failed.

Go down 
AuthorMessage
Admin
Admin


Posts : 317
Join date : 2011-09-04

PostSubject: As soon as the Backlight Of The LCD Television screen Has Failed.   Mon Oct 24, 2011 1:49 pm

Select the battery-release latch and press down in it with one hand, and then pull the battery right out the case, setting the laptop battery aside.
The convenience offered by the portability of a laptop computer can
become a hindrance with the screen malfunctions? it is not easy to
connect a new monitor since you can easily with a desktop strategy. If the backlight
within the LCD screen has was unable, you can see any sort of image. To fix this
problem, the entire inverter board will be connected LCD cable will need
to be manually succeeded. Here below are the instruction for your
reference.
1. Check in your manual of your pc or search the infomation from
the Internet to support the section of the manufacturer抯 websites. Basically
get that what brand fo inverter board you will want for your computer, require
my Pavilion DV2000 Panel as instance, I search for right one from a reputable site, HooToo. com, after which you can i fix it by myself.
2. Turn off any laptop抯 operation system. Turned off the LCD screen
motorcycle. CTurn the whole laptop over so your bottom end of the way it is is facing
up on to you. Locate the battery-release latch and press down in it
with one hand, and then pull the battery right out the case, setting the laptop battery aside.
3. Locate the rubber pieces at the edges and the top of LCD. Pop the
stopper pieces off the case by inserting a designated object underneath
them after which you can pulling out toward most people. Use a screwdriver to find the
screws hidden beneath stoppers.
4. Put the pc back over and amenable the LCD screen back off.
Slide a flat together with thin object, such as a screwdriver, directly
underneath the seam of this plastic bezel underneath a LCD screen.
Wiggle the screwdriver throughout gently until the bezel pops off the
case. Lift the bezel up and be certain if there is a new cable running to
any motherboard. Disconnect the cable if there's one.
5. Pull the fact on the screen towards you, and then remove it from
the laptop. Locate the inverter board in the bottoom of the screen along with
find the cable running out of your inverter board to the motherboard. Pull
off the strip of tape at the board and remove the screws holding it on
place if there are any within your particular model of laptop. Disconnect
the cable within the motherboard.
6. Connect typically the motherboard cable for clear plastic bezel and place a bezel
back onto the laptop case. Finally, just put the battery within the laptop
and power it on, and then if your manufacturer抯 logo appear on the
screen, it mean you happen to be successfull to install the new inverter
board and cable rightly.

Article Tags:
Inverter Snowboard
Back to top Go down
View user profile http://cq60.forumotion.com
 
As soon as the Backlight Of The LCD Television screen Has Failed.
Back to top 
Page 1 of 1
 Similar topics
-
» How to take the screen shot? when i set a kwargs, it is showing error... when i not set kwargs it is coming black color as background
» Can any one suggest what command could be used for refreshing a page using c sharp
» When Selecting the value it is not fully displayed so script is failed how to rectify this problem?
» Failed to locate the label inside a webpage
» how to select dropdown value

Permissions in this forum:You cannot reply to topics in this forum
CQ60 battery :: Your first category :: Your first forum-
Jump to: