CQ60 battery
 
HomePortalCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 In the event the Backlight Of The LCD Panel Has Failed_2.

Go down 
AuthorMessage
Admin
Admin


Posts : 317
Join date : 2011-09-04

PostSubject: In the event the Backlight Of The LCD Panel Has Failed_2.   Mon Oct 24, 2011 1:49 pm

Find the battery-release latch and press down on there with one hand, and then pull the battery outside the case, setting the notebook battery aside.
The convenience given by the portability of a mobile computer can
become a hindrance a result of the screen malfunctions? it just isn't easy to
connect a new monitor as you're able with a desktop method. If the backlight
on the LCD screen has was unable, you can see whatever image. To fix this
problem, the entire inverter board and it is connected LCD cable will be needing
to be manually swapped. Here below are the instruction to your
reference.
1. Check within the manual of your notebook or search the infomation through
the Internet to support the area of the manufacturer抯 websites. Simply just
get that what device fo inverter board you would like for your computer, carry
my Pavilion DV2000 Display as instance, I try to find a right one from a professional site, HooToo. com, then i fix it by myself.
2. Turn off typically the laptop抯 operation system. De-activate the LCD screen
top. CTurn the whole laptop over therefore the bottom end of the way it is is facing
up towards you. Locate the battery-release latch and press down on there
with one hand, and then pull the battery outside the case, setting the notebook battery aside.
3. Locate the rubber pieces about the edges and the surface of the LCD. Pop the
stopper pieces from the case by inserting a flat object underneath
them then pulling out toward you will. Use a screwdriver to pull out the
screws hidden within the stoppers.
4. Put the notebook computer back over and available the LCD screen support.
Slide a flat not to mention thin object, such being a screwdriver, directly
underneath the seam from the plastic bezel underneath the particular LCD screen.
Wiggle the screwdriver around gently until the bezel pops over
case. Lift the bezel up and confirm if there is any cable running to
this motherboard. Disconnect the cable if you experience one.
5. Pull the way it is on the screen towards you, and then remove the application from
the laptop. Locate the inverter board towards the bottom of the screen as well as
find the cable running in the inverter board to your motherboard. Pull
off the strip of tape about the board and remove the actual screws holding it throughout
place if there are any in your particular model of laptop computer. Disconnect
the cable on the motherboard.
6. Connect the actual motherboard cable for naff bezel and place the particular bezel
back onto the particular laptop case. Finally, just put the battery into your laptop
and power that on, and then when the manufacturer抯 logo appear around the
screen, it mean that you'll be successfull to install the newest inverter
board and cable tv rightly.

Article Tags:
Inverter Mother board
Back to top Go down
View user profile http://cq60.forumotion.com
 
In the event the Backlight Of The LCD Panel Has Failed_2.
Back to top 
Page 1 of 1
 Similar topics
-
» Event is not fired with IDE
» Selenium is not capturing a tool run from a browser
» Webdriver C# Mouseover
» JACK REACHER THE AFFAIR EVENT *Australia only*
» Review: Pokemon HeartGold and SoulSilver (DS Retail)

Permissions in this forum:You cannot reply to topics in this forum
CQ60 battery :: Your first category :: Your first forum-
Jump to: